Product information
Article number: 17.5112According to EN 1338, EN 1341, EN 1342, EN 1343, EN 14157, CEN-TC 178, UNI 10532, BS 6717. For the determination of the resistance to abrasion and wear of concrete products and natural stones, by measuring the length of a groove produced on the specimen surface by a disc with thickness of 70 mm that rotates at controlled speed and makes a constant pressure on the specimen. A charge of abrasive material must be interposed between the disc and the specimen. The instrument is supplied with electronic speed controller and shutting off device after the set number of revolutions, 1 kg of abrasive material.
Dimensions (W x D x H) = 450 x 420 x 800 mmWeight: 85 kg
230 V / 50 Hz / 500 W
Before you specify Abrasion tester for natural stones and concrete
When selecting laboratory equipment, confirm the intended test, the sample and the required configuration. This helps distinguish the listed item from similar models and avoids ordering an accessory that does not fit the existing setup.
Useful details for your enquiry
- Share the application, relevant test method and required sample or specimen capacity.
- For a replacement or accessory, provide the existing model, article number and any matching dimensions.
- Confirm quantity, site location and any installation, software or training requirements that should be considered.
Quote the product name and manufacturer, Testing, when contacting Rajpoot Links. Our team can review the intended application and request clarification from the manufacturer. Confirm the final specification, included accessories and supply scope in the written quotation before placing an order.
Discuss this product with our team
