Product information
Anchors produces refractory anchors for fibers (for insulating blankets, insulating boards/pannels, modules fibers). The fiber linings are common when we need the lining with good thermal shock resistance and a fast installation.
Example : heat treatment furnaces.
D1 : “Cerafix” type anchors
«CERAFIX» type anchors : Anchors for fibers with content 95 % Al2O3, the cerafix system is used with the presence of high corrosion with temperatures that can reach up to 1500°C). Exists in 2 lengths CERAFIX 1 : 70 mm or CERAFIX 9 : 120 mm. This system is used with a stud PRESSON M6 at the back. (DRS or DRH).
D2 : “Press on” type anchors
DRS.RT, DRS.CT, DRH, DRT, DRP, POC, LPC, MTC : anchors for fibers composed of : 1 stud in round material for gun welding or hand welding with a thread and a fixing clip placed on the thread on the hot face.
D3 : “Fiberfix” type anchors
FFS, FFH, FFT, LFF040, LFF060, MTC : anchors for fibers composed of : 1 stud in round material for gun welding or hand welding and fixing clip quarter-turn on the hot face.
D4 : “Insultwist” type anchors
INS-INH-LWI : anchors for fibers composed of : 1 stud in flat material for gun welding or hand welding and fixing clip quarter-turn on the hot face.
Cuplocks suitable for this system on request.
D5 : “Cuplocks” type anchors
CUP-050, CUP-025, WAS CUP : ceramic cuplocks for insulating fiber linings. Used in case of the presence of gas in the furnace which is too corrosive and that the clip can’t support it. System used with a fiberfix stud at the back (FFS or FFH).
D6 : “Stack bond” type anchors
modul anchors for a quick placement.
D7 : “IBA” type anchors
The best of modul anchors, 3 anchoring points.
D8 : “P-pin” type anchors
IPH, IPS, IPT, TPS, TPH, TPT, RIN/SRN : anchors for a hard backup insulating.
