Test standard
Provide the method, material and specimen geometry.
THE PRODUCT PORTFOLIO
Find the right configuration.
Explore the Testing equipment listed in our catalogue for materials preparation and physical or mechanical testing.
Equipment capacity
Define load, dimensions, range and throughput for the intended tests.
Accessories
Confirm fixtures, moulds, preparation items and replacement parts required with the system.
EXPLORE THE RANGE
Testing equipment
265 catalogue products
Testing
IP-8 Ultrasonic-Multiplexer-Tester V5
Article number: 1.0380 For simultaneous measuring with 8 pairs of probes and 8 thermo sensors. Scope of Delivery USB V2.0 Inclusive cables Calibration bar…
View product
Testing
Mortar workability apparatus
Article number: 1.0312 According to EN 413-2, NF P18-452. By vibration the mortar flows from the large chamber into the smaller one. The time…
View product
Testing
Dropping ball apparatus
Article number: 1.0311 According to BS 4551-1, BS 6463-4. Consisting of Dropping device mounted on a stand Acrylic ball Mould with 100 mm dia.…
View product
Testing
Flow control disk for floating screed
Article number: 1.0313 According to EN 13454, DIN 4208. Made of Plexiglass Dimensions (W x D x H) = 310 x 310 x 5…
View product
Testing
Mortar compactibility container
Article number: 1.0245 According to DIN 18555, EN 1015. Dimensions (W x D x H) = 100 x 100 x 200 mm Weight: 1.2…
View product
Testing
Flow-test channel for grout
Article number: 1.0249 According to EN 13395-2. Design according to German Concrete Association. For testing the workability of grout. Dimensions (W x D x…
View product
Testing
Consistometer for plasters + masonry cements
Article number: 1.0236 According to EN 413-2, EN 459-2, EN 1015-4. Including mould and tamper. Dimensions (W x D x H) = 150 x…
View product
Testing
Consistency meter
Article number: 1.0310 According to EN 1015-9, EN 13294. Test unit for workable life and correction time of fresh mortar. Scope of delivery Balance…
View product
Testing
Solution calorimeter
Article number: 1.0235 According to EN 196-8, ASTM C186 and BS 4550. For determination of the heat of hydration. Scope of Delivery Dewar flask…
View product
Testing
Sample container
Article number: 1.0283.02 According to EN 196-9. For holding the mortar samples. Dimensions Volume: 880 cm³ 84 mm dia. x 162 mm Weight: 7,0…
View product
Testing
Calorimeter – analysis software EN196-9
Article number: 1.0283.04 Calorimeter – analysis software according to EN 196-9. For reporting and editing the recorded and stored values and for calculating of…
View product
Testing
Reference calorimeter acc. EN 196-9
Article number: 1.0283.01 According to EN 196-9. For the semi-adiabatic Langavant method. Weight: 4.6 kg
View product
Testing
Temperature recorder
Article number: 1.0283.03 For recording and transmission of temperature values. With 4 channels and USB port. Dimensions (W x D x H) = 140…
View product
Testing
Langavant test calorimeter
Article number: 1.0283.00 According to EN 196-9. For the semi-adiabatic Langavant method. Including factory calibration certificate. Dimensions Dewar vessel: 100 dia. x 240 mm…
View product
Testing
Calibration equipment
Article number: 1.0283.05 To calibrate the test calorimeter Consisting of Calibration cylinder as a heated core made of aluminium, with approx. 2000 Ohm Stabilized…
View product
Testing
Langavant calorimeter set acc. to EN 196-9
Article number: 1.0283 According to EN 196-9. Used to measure the heat of hydration of cement by the semi-adiabatic method. Scope of delivery 1.0283.00…
View product
Testing
Apparatus for determining the reactivity
Article number: 1.0280 According to EN 459-2. Consists of Dewar vessel: 1000 ml, 77 mm dia., plastic lid with filling aperture Digital mixer EUROSTAR…
View product
Testing
Slaking vessel for lime
Article number: 1.0281 According to EN 459-2. Inner dia. of the vessel 113 mm; height 140 mm.
View product
Testing
Volume constancy test of building lime
Article number: 1.0282 According to EN 459 -2 with the alternative method. Three-piece steel mould for the production of a cylindrical specimen 50 mm…
View product
Testing
Bulk density apparatus to Boehme
Article number: 1.0237 According to EN 459-2, DIN 1060. Weight: 3.8 kg 1.0237-operation-manual-bulk-density-apparatus-en.pdf
View product
Testing
Pycnometer
Article number: 8.0139 Other sizes 8.0138: 25 ml 8.0139: 50 ml 8.0140: 100 ml
View product
Testing
Le Chatelier flask volume 250 ml
Article number: 1.0211 According to EN 196-6, ASTM C188, AASHTO T133. Graduated neck from 0 – 1 ml and from 18 – 24 ml.
View product
Testing
Bulk density of cement
Article number: 1.0208 Scope of Delivery Sieve funnel Tripod Measuring vessel 1 liter Putty knife Straight edge Aluminium scoop Dimensions (W x D) =…
View product
Testing
Dispenser 50ml Sulzer
Article number: 10.0350.03 Dispenser 50ml Sulzer weight: about 0.175 kg
View productLET’S MOVE YOUR PROJECT FORWARD
Discuss your configuration.
Share your material, measurement or test requirements, site location and intended schedule with our team.
KEEP EXPLORING