Testing
Consistency meter
Article number: 1.0310 According to EN 1015-9, EN 13294. Test unit for workable life and correction time of fresh mortar. Scope of delivery Balance…
View productPRODUCT CATEGORY
Testing Devices
Explore Testing Devices products for your laboratory or industrial workflow. Compare the listed models and share your application, test standard and configuration requirements with our team.
117 products in this category
Testing
Solution calorimeter
Article number: 1.0235 According to EN 196-8, ASTM C186 and BS 4550. For determination of the heat of hydration. Scope of Delivery Dewar flask…
View product
Testing
Sample container
Article number: 1.0283.02 According to EN 196-9. For holding the mortar samples. Dimensions Volume: 880 cm³ 84 mm dia. x 162 mm Weight: 7,0…
View product
Testing
Calorimeter – analysis software EN196-9
Article number: 1.0283.04 Calorimeter – analysis software according to EN 196-9. For reporting and editing the recorded and stored values and for calculating of…
View product
Testing
Reference calorimeter acc. EN 196-9
Article number: 1.0283.01 According to EN 196-9. For the semi-adiabatic Langavant method. Weight: 4.6 kg
View product
Testing
Temperature recorder
Article number: 1.0283.03 For recording and transmission of temperature values. With 4 channels and USB port. Dimensions (W x D x H) = 140…
View product
Testing
Langavant test calorimeter
Article number: 1.0283.00 According to EN 196-9. For the semi-adiabatic Langavant method. Including factory calibration certificate. Dimensions Dewar vessel: 100 dia. x 240 mm…
View product
Testing
Calibration equipment
Article number: 1.0283.05 To calibrate the test calorimeter Consisting of Calibration cylinder as a heated core made of aluminium, with approx. 2000 Ohm Stabilized…
View product
Testing
Langavant calorimeter set acc. to EN 196-9
Article number: 1.0283 According to EN 196-9. Used to measure the heat of hydration of cement by the semi-adiabatic method. Scope of delivery 1.0283.00…
View product
Testing
Apparatus for determining the reactivity
Article number: 1.0280 According to EN 459-2. Consists of Dewar vessel: 1000 ml, 77 mm dia., plastic lid with filling aperture Digital mixer EUROSTAR…
View product
Testing
Slaking vessel for lime
Article number: 1.0281 According to EN 459-2. Inner dia. of the vessel 113 mm; height 140 mm.
View product
Testing
Volume constancy test of building lime
Article number: 1.0282 According to EN 459 -2 with the alternative method. Three-piece steel mould for the production of a cylindrical specimen 50 mm…
View product
Testing
Bulk density apparatus to Boehme
Article number: 1.0237 According to EN 459-2, DIN 1060. Weight: 3.8 kg 1.0237-operation-manual-bulk-density-apparatus-en.pdf
View product
Testing
Pycnometer
Article number: 8.0139 Other sizes 8.0138: 25 ml 8.0139: 50 ml 8.0140: 100 ml
View product
Testing
Le Chatelier flask volume 250 ml
Article number: 1.0211 According to EN 196-6, ASTM C188, AASHTO T133. Graduated neck from 0 – 1 ml and from 18 – 24 ml.
View product
Testing
Bulk density of cement
Article number: 1.0208 Scope of Delivery Sieve funnel Tripod Measuring vessel 1 liter Putty knife Straight edge Aluminium scoop Dimensions (W x D) =…
View product
Testing
Dispenser 50ml Sulzer
Article number: 10.0350.03 Dispenser 50ml Sulzer weight: about 0.175 kg
View product
Testing
Static Mixer Quadro 83 mm
Article number: 10.0350.02 Static Mixer Quadro 83 mm for SikaPower-2955 12 pieces per bag Weight: about 0,27 kg
View product
Testing
Cartridge A+B 50 ml SikaPower-2955
Article number: 10.0350.01 Cartridge A+B 50 ml SikaPower-2955 Scope of delivery: 6 cartridges 3 static mixers per cartridge Weight: about 0,56 kg
View product
Testing
Two-Component Adhesive SikaPower-2955
Article number: 10.0350 Two-Component Adhesive SikaPower-2955 STARTER KIT For pull-off / peel strength tests of concrete, PCC mortar, and coatings Working time: 90 sec…
View product
Testing
Quicksolid two-component adhesive
Article number: 10.0331.QSS Full set Especially for adhesive tensile/ tear resistance strength tests of concrete, PCC mortar and coatings. Reaction time 75-90 sec. Spreading…
View product
Testing
Digital bond strength tester TESTING
Article number: 10.0314 With force and displacement measurement system type “TESTING PERFORMANCE”. 3,2” touch display with start/stop button and multilanguage display. Standards: EN 1542,…
View product
Testing
Multiple Bond Strength Pull-off Tester MHP 400
Multiple Bond Strength Pull-off Tester MHP 400 Article number: 21.1301.02-SV-i20 For testing bond strength of adhesives, mortar, coatings, paints, etc. Optimized for plates 400…
View product
Testing
Measuring device according to Schmidt
Article number: 1.0233 According to EN 445:1996-07. For rapid volumetric determination of setting and swelling ratio of intrusion mortar with reference sample container 1…
View product