Testing
Compacting factor apparatus
Article number: 2.0259 According to BS 1881 T103, BS 5075. For determination of the workability of concrete. Consisting of Frame with two conical hoppers…
View productPRODUCT CATEGORY
Specimen preparation & curing
Explore Specimen preparation & curing products for your laboratory or industrial workflow. Compare the listed models and share your application, test standard and configuration requirements with our team.
132 products in this category
Testing
Slump cone complete test set
Article number: 2.0206.05 According to EN 12350-2, BS 1881, ASTM C143, AASHTO T119. For determination of the workability of fresh concrete. Consisting of Base…
View product
Testing
Slump Test Set
Article number: 2.0206 According to EN 12350-2, BS 1881, ASTM C143, AASHTO T119. For determination of the workability of fresh concrete. Consisting of Base…
View product
Testing
Slump cone
Article number: 2.0206.01 According to EN 12350-2, EN 12350-8. Slump cone according to Abrams. Dimensions 100 / 200 mm dia. Height: 300 mm Weight:…
View product
Testing
Pocket concrete penetrometer
Article number: 2.0209 According to ASTM C403. Technical Data For the evaluation of the initial set of concrete mortar Plunger surface: 32 mm² Measuring…
View product
Testing
Concrete mortar penetrometer
Article number: 2.0244 According to ASTM C403, AASHTO T197, UNI 7123. For determination of the setting time of the mortar fraction in concrete mixtures…
View product
Testing
Plasticity meter
Article number: 2.0245 Used for quick and easy measurements of the plasticity of mixtures, especially concrete, and so to rapidly detect any excess of…
View product
Testing
Concrete workability meter
Article number: 2.0243 According to EN 413, NF P18-452. The concrete flows by vibration from the large chamber into the small one. The time…
View product
Testing
K-Slump tester
Article number: 2.0240 According to ASTM C1362. The device is used to determine the workability and degree of compaction of fresh concrete after being…
View product
Testing
Kelly-Ball apparatus
Article number: 2.0227 According to ASTM C360. The penetration in fresh concrete is measured to check the workability of fresh concrete. Weight: 15 kg
View product
Testing
Tamper (wooden)
Article number: 2.0205.01 For slump table based on Graf
View product
Testing
Slump cone for slump table
Article number: 2.0205.02
View product
Testing
Compacting container based on Walz
Article number: 2.0207 Based on Walz and according to EN 12350-4. Dimensions 200 x 200 x 400 mm Weight: 4.6 kg
View product
Testing
Slump table acc. to Graf without accessories
Article number: 2.0205.03 According to EN 12350-5. Ensured through glazed wooden parts. Dimensions (W x D x H) = 700 x 700 x 180…
View product
Testing
Slump table based on Graf with circle markings
Article number: 2.0205.03.KK According to EN 12350-5. Very high long-life cycle ensured through waterproof plywood. With circle markings for direct readout of the consistency…
View product
Testing
Slump table based on Graf, complete
Article number: 2.0205 According to EN 12350-5. Very high long-life cycle ensured through glazed wooden parts. Scope of delivery Slump table based on Graf…
View product
Testing
Slump table based on Graf, complete and with circle markings
Article number: 2.0205.KK According to EN 12350-5. For determination of the workability of cement. Very high long-life cycle ensured through waterproof plywood. With circle…
View product
Testing
Device for sampling of drilling dust for chloride-content tests
Article number: 10.2600 High performance motor with electronic rotary and blow regulation for efficient continuous use. Low vibration by shock-absorbing suspension of engine and…
View product
Testing
Powerful drill dust extractor
Article number: 10.2601 Powerful drill dust extractor with specially developed, integrated suction system Compact hammer drill with drill dust separator, intergated cleaning function by…
View product
Testing
Abrasion tester for natural stones and concrete
Article number: 17.5112 According to EN 1338, EN 1341, EN 1342, EN 1343, EN 14157, CEN-TC 178, UNI 10532, BS 6717. For the determination…
View product
Testing
Cube tong for water basin
Article number: 2.0403.03 For specimen cubes 150 mm. Weight: 2.8 kg
View product
Testing
Plastic water basin, plastic
Article number: 2.0403 Technical Data Capacity: 550 liter Dimensions outside: (W x D x H) = 1310 x 960 x 640 mm Weight: 21…
View product
Testing
Plastic water basin plastic, capacity 700 l
Article number: 2.0404 For storage of specimen cubes. Technical Data Capacity: 700 liter Dimensions: (W x D x H) = 1310 x 960 x…
View product
Testing
Floating thermometer
Article number: 9.0805 -15 – +50°C
View product