INDUSTRIES WE SERVE

Cement

From raw meal to consistent cement.

Explore equipment

YOUR APPLICATION, IN FOCUS

Start with what you need to measure.

Connect sample preparation, elemental analysis and phase identification across the cement quality-control workflow.

Elemental composition

Review raw-meal, clinker and cement chemistry with an XRF configuration matched to your material and throughput.

Mineral phases

Use diffraction to investigate crystalline phases where phase information is needed alongside elemental results.

Preparation and automation

Consider grinding, pellet pressing, fusion and sample handling as part of the complete analytical workflow.

EXPLORE THE RANGE

Cement equipment

218 catalogue products

Testing

Type B shrinkage measuring device

Article number: 1.0228.04 According to DIN 52450, EN 196-1, EN 12808-4, ASTM C490, EN 12617-4. Specimens ASTM C490: 25 x 25 x 285 mm…

View product

Testing

Shrinkage measuring device type “C”

Article number: 1.0228 According to DIN 52450, EN 12808-4, EN 12617-4. For 40 x 40 x 160 mm specimens. Scope of delivery Type “C”…

View product

Testing

Type B shrinkage measuring device, digital gauge

Article number: 1.0228.07 According to DIN 52450, EN 196-1, EN 12808-4, ASTM C490. Specimens EN 12808-4: 25 x 25 x 285 mm ASTM C490:…

View product

Testing

Shrinkage measuring device type “C”, digital gauge

Article number: 1.0228.10 DIN 52450 For 40 x 40 x 160 mm specimens Scope of delivery • Shrinkage measuring device • Digital gauge, stroke…

View product

Testing

Shrinkage measuring device

Article number: 2.0222.06 For concrete cylinders dia. 150 mm, height 300 – 600 mm Scope of delivery Measuring device – standing version Digital gauge…

View product

Testing

Le Chatelier mould, EN 196

Article number: 1.0214 According to EN 196-3. To determine the volume constancy (soundness) of cement, electroless nickel plated.

View product

Testing

Le Chatelier mould, number-plate

Article number: 1.0214N According to EN 196-3. To determine the volume constancy (soundness) of cement; electroless nickel plated with number-plate.

View product

Testing

Brass ring moulds (3 pcs.) for Pat Test

Article number: 1.0324 According to EN 459-2, BS 1191, BS 6463-4. For determination of the soundness of hydrated lime and gypsum building plasters; brass…

View product

Testing

Water bath for Le Chatelier moulds

Article number: 1.0216 According to EN 196-3 . For 40 Le Chatelier moulds. Dimensions Internal dia. 345 mm (W x D x H) =…

View product

Testing

Testing device for Le Chatelier moulds

Article number: 1.0215 According to EN 196-3. Type Cement Research. Dimensions Including test weight: 300 g (W x D x H) = 220 x…

View product

Testing

High-pressure autoclav

Article number: 1.0230 According to ASTM C141, ASTM C151. Technical Data For mortar prisms, 25 bar For determination of the volume constancy (soundness) of…

View product

Testing

Ball harp

Article number: 1.0275 According to DIN 4126. For the determination of the liquid-flow limit of supporting clay liquids. Scope of Delivery Support with 2…

View product

Testing

Ring funnel

Article number: 1.0273 For the simplified determination of the time of water drainage (control of filtration). Technical Data Approx. 75 mm dia. Height approx.…

View product

Testing

Hydrometer

Article number: 1.0269 For determination of the drilling fluids made of anodized powdercoated aluminum. Measuring range: 0.9 – 2.5 g/cm³ Dimensions Length: 715 mm,…

View product

Testing

Filter press MFP

Article number: 1.0271 According to DIN 4127. For the determination of filtration properties and water evaporation rate of cement slurries and muds. The filter…

View product

Testing

Determination of sand content

Article number: 1.0274 In clay liquids (mud). To determine the sand content in vol.%. Scope of Delivery Sieve: 0.08 mm Funnel Glass tube: 10…

View product

Testing

Mud balance

Article number: 1.0270 For the determination of mud density. Robust construction for field use. Scope of Delivery Base Graduated arm with cup Lid Diverse…

View product

Testing

Marsh funnel made of break resistant plastic

Article number: 1.0251.01 For determination of the flow properties of fluid material (e.g. mud). Technical Data Including an 1 liter plastic measuring cup Nozzle…

View product

Testing

Waterretention of building plasters

Article number: 1.0278 According to EN 413-2, EN 1015-8. Consisting of Brass ring mould 100 mm dia.; inside x 25 mm height Brass straightedge…

View product

Testing

Marsh funnel

Article number: 1.0250 According to EN 445. For the determination of the flow properties of mortar with interchangeable nozzles dia. 8, 9, 10 and…

View product

Testing

Determination water permeability

Article number: 1.0277 According to EN 1015-21. Consisting of Funnel Stainless steel 200 mm dia. measuring cylinder 1 litre Class A, with plug and…

View product

Testing

Kit for determining the entrained air content

Article number: 1.0340ASTMC185 According to ASTM C185-08, AASHTO T137. For fresh mortar on the density method. Consisting of Measuring vessel, stainless steel, 400 ml…

View product