Elemental composition
Review raw-meal, clinker and cement chemistry with an XRF configuration matched to your material and throughput.
YOUR APPLICATION, IN FOCUS
Start with what you need to measure.
Connect sample preparation, elemental analysis and phase identification across the cement quality-control workflow.
Mineral phases
Use diffraction to investigate crystalline phases where phase information is needed alongside elemental results.
Preparation and automation
Consider grinding, pellet pressing, fusion and sample handling as part of the complete analytical workflow.
EXPLORE THE RANGE
Cement equipment
218 catalogue products
Rigaku Corporation
ZSX Primus IV
Tube-above sequential wavelength dispersive X-ray fluorescence spectrometer Elemental analysis of solids, liquids, powders, alloys and thin films As a tube-above sequential wavelength dispersive X-ray…
View product
Rigaku Corporation
Simultix 15
Tube-above simultaneous wavelength dispersive X-ray fluorescence spectrometer High-throughput elemental analysis of solids, powders, and alloys The compact and intelligent Simultix 15 is a powerful…
View product
Rigaku Corporation
SmartLab SE
MULTIPURPOSE X-RAY DIFFRACTION SYSTEM WITH BUILT-IN INTELLIGENT GUIDANCE Powder diffraction, thin film diffraction, SAXS, pole figure, residual stress and non-ambient experiments The SmartLab® SE…
View product
Roxon
ROXON’s Belt Condition Monitoring Systems
ROXON’s Belt Condition Monitoring Systems, designed to detect all damages that happen to the surface of conveyor belts avoiding production loss and ensuring safety.…
View productAnchors
Dramituff Standard version
DRAMITUFF is a single component, air setting, castable. It has a very good abrasion resistance, cold crushing strength and chemical resistance. It can be…
View product
Anchors
Anchors for Fibers – Series D
Anchors produces refractory anchors for fibers (for insulating blankets, insulating boards/pannels, modules fibers). The fiber linings are common when we need the lining with…
View product
Anchors
Support Brackets – Series C
Anchors produces refractory support brackets. Support brackets are used when the walls of the furnace are high.This enables to spread the weight on the…
View product
Anchors
Brick Anchors – Series B
Anchors produces refractory anchors for bricks linings. B1 : “BSTP” type anchors BSTP1/BSTP2 : Brick anchors for linings composed of refractory insulating bricks, this…
View product
Anchors
Castable Anchors manufacturer – Series A
Anchors produces refractory anchors for castable linings. Our range can suit all applications, We produce refractory anchoring systems in round and flat material, for…
View product
Proquicesa
ADITOR® R
ADITOR® R is a range of cement-enhancing admixtures developed by PROQUICESA and specifically designed to optimize the performance of ordinary Portland cements (OPC), limestone…
View product
Proquicesa
ADITOR® G
Reinforced grinding aids Its reinforced formula allows them to exert a doubly intense surfactant effect on the cement particles and achieve the highest levels…
View product
Proquicesa
ADITOR® M
COADYUVANT / FLUIDIFIERS FOR THE GRINDING OF ALL KINDS OF CEMENT Advanced technical solution with a great value for money, which allows to minimize…
View product
Calmetrix
Pheso Rheometer
Like all Calmetrix instruments, Pheso was designed by real users from the world of research and development. As a result, it combines all the…
View product
Calmetrix
I-Cal Ultra Isothermal Calorimeter for up to 8 sample cells
The I-Cal Ultra is an advanced Isothermal Calorimeter for up to eight 20 ml sample channels of differential measurement with variable references. It is…
View product
Calmetrix
I-Cal 2000 HPC Isothermal Calorimeter
I-Cal 2000 HPC (“High Precision Calorimeter”) is a 2-channel Isothermal Calorimeter. Like all Calmetrix I-Cal isothermal calorimeter models, I-Cal 2000 HPC features a sample…
View product
Calmetrix
I-Cal Flex Isothermal Calorimeter
The I-Cal Flex’s flexible design lets users change seamlessly between several plug and play configurations. Testing can be conducted on up to 8 sample…
View product
Testing
Climate-controlled double cabinet type 3621/17
Article number: 2.0276-3621/17 With control for humidity, temperature and CO2, especially for analysis of the potential carbonization resistance of concrete test cube (120 x…
View product
Testing
Frost-thaw cabinet type CTC 256
Article number: 2.0276.CTC256 According to DIN 12880, EN 61010-1,2, EN 60068-2-1, EN 61010-1.2, 2-2 and 2-3. For climate and temperature test. Technical data Temperatur…
View product
Testing
Device for sampling of drilling dust for chloride-content tests
Article number: 10.2600 High performance motor with electronic rotary and blow regulation for efficient continuous use. Low vibration by shock-absorbing suspension of engine and…
View product
Testing
Powerful drill dust extractor
Article number: 10.2601 Powerful drill dust extractor with specially developed, integrated suction system Compact hammer drill with drill dust separator, intergated cleaning function by…
View product
Testing
Cube tong for water basin
Article number: 2.0403.03 For specimen cubes 150 mm. Weight: 2.8 kg
View product
Testing
Plastic water basin, plastic
Article number: 2.0403 Technical Data Capacity: 550 liter Dimensions outside: (W x D x H) = 1310 x 960 x 640 mm Weight: 21…
View product
Testing
Plastic water basin plastic, capacity 700 l
Article number: 2.0404 For storage of specimen cubes. Technical Data Capacity: 700 liter Dimensions: (W x D x H) = 1310 x 960 x…
View product
LET’S MOVE YOUR PROJECT FORWARD
Tell us about your application.
Share your material, measurement or test requirements, site location and intended schedule with our team.
KEEP EXPLORING