Testing
Slump table based on Graf with circle markings
Article number: 2.0205.03.KK According to EN 12350-5. Very high long-life cycle ensured through waterproof plywood. With circle markings for direct readout of the consistency…
View productPRODUCT CATEGORY
Physical & mechanical testing
Test physical properties against your application and test standard.
271 products in this category
Testing
Slump table based on Graf, complete
Article number: 2.0205 According to EN 12350-5. Very high long-life cycle ensured through glazed wooden parts. Scope of delivery Slump table based on Graf…
View product
Testing
Slump table based on Graf, complete and with circle markings
Article number: 2.0205.KK According to EN 12350-5. For determination of the workability of cement. Very high long-life cycle ensured through waterproof plywood. With circle…
View product
Testing
Climate-controlled double cabinet type 3621/17
Article number: 2.0276-3621/17 With control for humidity, temperature and CO2, especially for analysis of the potential carbonization resistance of concrete test cube (120 x…
View product
Testing
Frost-thaw cabinet type CTC 256
Article number: 2.0276.CTC256 According to DIN 12880, EN 61010-1,2, EN 60068-2-1, EN 61010-1.2, 2-2 and 2-3. For climate and temperature test. Technical data Temperatur…
View product
Testing
Set of Thaulow test equipment
Article number: 2.0237 Scope of delivery Pot Plexiglass plate Stirrer Hand scoop Sponge Straight edge Balance Dimesions Weight: 16 kg
View product
Testing
Frame
Article number: 2.0277 Frame EN 12390-7, BS 812, 1881:114 For the determination of the specific density of fresh and hardened concrete and aggregates The…
View product
Testing
Tools for preparing of the measuring section for BAM
Article number: 10.1305.11 Stress-measuring extensometer. Scope of Delivery 1 Hammer 1 Double prick punch for 20 and 40 mm 1 Double prick punch for…
View product
Testing
Strain gauge 100 mm
Article number: 10.1303 Variants: Strain gauge 100 mm with tube measuring base – 10.1303 Strain gauge 100 mm with tube measuring base – 10.1304…
View product
Testing
BAM stress-measuring extensometer
Article number: 10.1305 Technical Data Rated measuring length: 100 mm Measuring accuracy: 0.001 mm Measuring range: ± 0.5 mm Without accessories
View product
Testing
BAM stress-measuring extensometer, complete in case
Article number: 10.1305.10 Technical Data Measuring length: 100 mm Measuring accuracy: 0.001 mm Measuring range: ± 0.5 mm In case with calibration section Double-ended…
View product
Testing
Device for sampling of drilling dust for chloride-content tests
Article number: 10.2600 High performance motor with electronic rotary and blow regulation for efficient continuous use. Low vibration by shock-absorbing suspension of engine and…
View product
Testing
Powerful drill dust extractor
Article number: 10.2601 Powerful drill dust extractor with specially developed, integrated suction system Compact hammer drill with drill dust separator, intergated cleaning function by…
View product
Testing
Security cabinet for Los Angeles machine
Article number: 17.5075.01 Conforming to CE safety directive. When opening the cabinet’s door during Los Angeles working a microswitch automatically stops the rotation of…
View product
Testing
Los Angeles abrasion machine
Article number: 17.5075 According to EN 1097-2, EN 12697-17, EN 13697-43, ASTM C131, AASHTO T96. Used to determine the resistance of aggregates to abrasion.…
View product
Testing
Abrasion machine based on Boehme
Article number: 2.0413 According to EN 1338, EN 1339, EN 13892-3, EN 14157, DIN 52108. Abrasion test for paving stones, concrete slabs, slabs made…
View product
Testing
Polishing machine for 14 specimen
Article number: 17.5128 According to EN 1097-8, EN 1341, EN 1342, EN 1343, BS 812:114, NF P18-575, CNR N.105. It measures the resistance of…
View product
Testing
Abrasion tester for natural stones and concrete
Article number: 17.5112 According to EN 1338, EN 1341, EN 1342, EN 1343, EN 14157, CEN-TC 178, UNI 10532, BS 6717. For the determination…
View product
Testing
Micro-Deval testing machine for wear resistance
Article number: 17.5077 According to EN1097-1, EN 13450, NF P18-572, NF P18-576, UNE 83115, CNR N° 109. For the determination of the resistance to…
View product
Testing
Security cabinet for Los Angeles machine with sound insulation
Article number: 17.5075.12 With sound-proofing material. Conforming to CE safety directive internally lined with sound-proofing material for noise reduction. Dimensions (w x D x…
View product
Testing
Cube tong for water basin
Article number: 2.0403.03 For specimen cubes 150 mm. Weight: 2.8 kg
View product
Testing
Plastic water basin, plastic
Article number: 2.0403 Technical Data Capacity: 550 liter Dimensions outside: (W x D x H) = 1310 x 960 x 640 mm Weight: 21…
View product
Testing
Plastic water basin plastic, capacity 700 l
Article number: 2.0404 For storage of specimen cubes. Technical Data Capacity: 700 liter Dimensions: (W x D x H) = 1310 x 960 x…
View product
Testing
Floating thermometer
Article number: 9.0805 -15 – +50°C
View productUSEFUL ANSWERS
Frequently asked questions
What is included in the Physical & mechanical testing range?
Test physical properties against your application and test standard. The current product range is listed on this page; open a product for its available details and images.
How should I select Physical & mechanical testing equipment?
Start with your material, test or process objective and required workflow. Share relevant standards, sample dimensions and throughput so the configuration can be reviewed.
How do I request a quotation for this category?
Select a product from this category or use the enquiry form. Include the product name, quantity, application, site location, phone number and any accessories or support required.